Search found 7 matches

by Kimball S
Tue Dec 10, 2019 7:58 am
Forum: Intelli-MAX Software: LAYOUT / MAKE
Topic: How to tell Protomax to cut on the center of the line?
Replies: 4
Views: 786

Re: How to tell Protomax to cut on the center of the line?

Please contact me as that part is really ugly and a crappy cut. If it is a ProtoMAX part I can help you.

Kimball Smith
kimball.smith@omax.com
206-786-3721
by Kimball S
Fri Sep 22, 2017 3:39 pm
Forum: ProtoMAX Operations
Topic: [Pre purchase question] - Is my space suitable?
Replies: 3
Views: 2046

Re: [Pre purchase question] - Is my space suitable?

The actual table less the wheels is 34", with the wheels 39 1/2" wide. You can view the complete Utilities requirement on the ProtoMAX.com. opening page. The short answer is yes, a utility sink could work. Not so sure about a regular sink. A concern to keep in mind is the ProtoMAX drain water will h...
by Kimball S
Fri Sep 22, 2017 11:55 am
Forum: Abrasive Waterjet 101
Topic: How fast does it cut?
Replies: 1
Views: 1137

Re: How fast does it cut?

Thanks for your Question. Cutting speed is affected by three major factors. The type of cut finish needed, from a faster cut with a rough and poor cut tolerance to slower cut with a smooth and better cut tolerance. The type and thickness of material are the last two factors. The actual nozzle moveme...
by Kimball S
Fri Sep 22, 2017 11:12 am
Forum: Intelli-MAX Software: LAYOUT / MAKE
Topic: Do I need an Internet connection to run the machine?
Replies: 1
Views: 1124

Re: Do I need an Internet connection to run the machine?

The ProtoMAX does not need internet connection to operate. Software comes loaded on the included laptop and connects via a USB.
by Kimball S
Thu Sep 14, 2017 2:21 pm
Forum: Abrasive Waterjet 101
Topic: How thick can it cut?
Replies: 3
Views: 2119

Re: How thick can it cut?

ProtoMAX will cut up to 1" thick material
by Kimball S
Thu Sep 14, 2017 11:51 am
Forum: Intelli-MAX Software: LAYOUT / MAKE
Topic: File compatibility with other waterjets?
Replies: 2
Views: 1500

Re: File compatibility with other waterjets?

ProtoMAX LAYOUT creates DXF files, which are widely accepted by Machine Tool Manufacturers, including water jets and CAD drawing software
by Kimball S
Thu Sep 14, 2017 11:41 am
Forum: ProtoMAX Operations
Topic: How do I locate my cut to an existing part?
Replies: 1
Views: 1312

Re: How do I locate my cut to an existing part?

Thanks for the excellent question. First thing is locate the 0,0, point on the table. Your software will have a DXF file for a new bracket. Cut bracket from either .125" aluminum or SS so it will not rust. Remove the bracket which came with ProtoMAX and mount the new bracket on the table per instruc...