Here's a fun part for RC fan ducts.

Ideas and feedback for your ProtoMAX.
Post Reply
User avatar
RotaryKing
Posts: 4
Joined: Wed Feb 07, 2018 1:58 pm

Thu Feb 08, 2018 2:58 pm

Here's a fun part that can be made with your Proto-MAX machine!

This is just a fun part I was playing with. I like this type of shape for my RC ducted fans.
Light weight plastic is best for flying things, but my Proto-MAX can even make this in Steele or Titanium.

Enjoy!
Attachments
Proto_Spoke_Ring.dxf
(27.8 KiB) Downloaded 143 times
User avatar
Carl O
OMAX Employee
Posts: 28
Joined: Thu Sep 14, 2017 10:43 am
Location: OMAX Corporation
Contact:

Thu Feb 08, 2018 3:16 pm

Nice! Here is what it looks like when rendered. Do you happen have a picture of the final part to share?

Carl.
RC_Fan_Duct.jpg
User avatar
RotaryKing
Posts: 4
Joined: Wed Feb 07, 2018 1:58 pm

Fri Feb 09, 2018 7:59 am

Here's the finished part, after going over it with the polishing wheel.

The part shown was cut in 1/4 inch thick Aircraft Aluminum, and it took about 23 minutes to cut.
Attachments
20180209_072409.jpg
Post Reply