Christmas Ornaments

Made something amazing? Show everyone here.
Post Reply
User avatar
Christine L
OMAX Employee
Posts: 7
Joined: Thu Sep 14, 2017 9:57 am

Mon Nov 26, 2018 2:44 pm

Christmas is near and thought I would add a little fun to testing on our in-house Proto-MAX machine. These ornaments were cut with Aluminum 6061 in 0.07". Due to thickness (more like thinness) of material and material type (softer than steel), cut time was pretty reasonable. Each ornament was cut with 3 pierces and they are approx. 3.5" H x 3" W each.
Attachments
Christmas2018LAYOUT_01.png
Christmas2018LAYOUT_02.png
Christmas2018MAKE.png
Christmas2018_01.jpg
Christmas2018_02.jpg

User avatar
Christine L
OMAX Employee
Posts: 7
Joined: Thu Sep 14, 2017 9:57 am

Fri Dec 07, 2018 3:35 pm

This is finished product. Sand blasted then painted in gold spray paint.
Attachments
ChristmasOrnaments.jpg
Finished product

Post Reply