11 inch diameter HDPE plastic with 10 inch circle cut out. Notch a space for the light cord to go through.
- image024.jpg (15.77 KiB) Viewed 15549 times
- image028.jpg (14.66 KiB) Viewed 15549 times
Mirror_Rim.omx and clock_mirror.omx
The mirror rim is 1/8 inch aluminum, 11 inches in diameter with a 10 inch circle cut out of the middle.
The clock mirror is 10 inches in diameter and 1/8 inch thick, purchased round at Michael’s craft store. A hole is cut in the middle for the clock motor to change the battery and adjust the time.
- image030.jpg (9.29 KiB) Viewed 15549 times
- image032.jpg (8.3 KiB) Viewed 15549 times