Kids' room signage

Made something amazing? Show everyone here.
Post Reply
User avatar
Christine L
OMAX Employee
Posts: 18
Joined: Thu Sep 14, 2017 9:57 am

Wed Sep 25, 2019 4:02 pm

Another fun personal project~

I've cut these two shadow projection room signages with Software engineer department Proto-MAX for my kids' rooms.

Material: Stainless steel
Thickness: 22 gauge (approx. 0.03125")
Cut time: Approximately 14 minutes
Fonts used (modified): Ariel Stencil.fnt (Tool Path Text)

Post processes:
1. Sandblasted to eliminate any cosmetic blemishes on the surface.
2. Bent the plate to 90° using in-house bending machine.
3. Cleaned the surface again for the finished look.

After putting on the wall, shadow projection displays letters.
Attachments
RoomTag_04.jpg
Signage from under
RoomTag_03.jpg
Signage from over
RoomTag_02.jpg
Signage from straight ahead
RoomTag_01.jpg
Finished product
User avatar
Dave F
OMAX Employee
Posts: 34
Joined: Mon Sep 11, 2017 2:13 pm

Fri Sep 27, 2019 3:32 am

Beautiful job, I'm going to share with some other folks here as well. Thanks!
User avatar
Christine L
OMAX Employee
Posts: 18
Joined: Thu Sep 14, 2017 9:57 am

Fri Sep 27, 2019 3:19 pm

Great~ Thank you.
Post Reply