ProtoPUZZLE

Made something amazing? Show everyone here.
Post Reply
User avatar
ProtoMAX Master
Posts: 10
Joined: Tue Feb 06, 2018 2:48 pm

Wed Feb 07, 2018 1:46 pm

I made this Puzzle by being creative with the Slit Qualities and the Stretch Arc feature. The puzzle was made by cutting all of the pieces with slits first. The after I cut out the Square. You can cut each piece individually if you want to. I just was interested in seeing if the puzzle would hold together by cutting them at the same time. I used rhino board so the pieces wouldn't fall into the tank. Another cool feature to show off with this part is the ProtoMAX "P". I made sure it didn't separate the material. If anyone is interested on how I did this just let me know!
Attachments
Together.png
All put together with that awesome ProtoMAX P
Apart.png
How I leave it on my desk so I when I come back from break I can see if someone was bored and solved it while I was gone.
User avatar
Dave F
OMAX Employee
Posts: 23
Joined: Mon Sep 11, 2017 2:13 pm

Tue Feb 13, 2018 8:10 am

VERY interested in program used to make the puzzle. Really broadens the interest across a wide age group. Thanks!
Post Reply