Spur Gear Set

Made something amazing? Show everyone here.
Post Reply
User avatar
Dan M
OMAX Employee
Posts: 7
Joined: Thu Sep 14, 2017 9:59 am

Thu Feb 08, 2018 2:18 pm

This is a Gear set designed in ProtoMax LAYOUT using the Gear, Rack and Sprocket Generator. They were cut with MAKE on the ProtoMax. Cut from 5/16" thick 6061 aluminum plate. Teeth are Pitch: 16, Pressure angle: 20.

IMG_9730.JPG
IMG_9731.JPG

Post Reply