How thick can it cut?

General abrasive waterjet discussions.
Post Reply
User avatar
NinjaBatman
Posts: 15
Joined: Wed Sep 13, 2017 3:47 pm

Thu Sep 14, 2017 9:21 am

What is the thickest material I can put on the machine, and what is the thickest material reasonable to cut?

User avatar
Kimball S
OMAX Employee
Posts: 6
Joined: Tue Sep 12, 2017 11:38 am

Thu Sep 14, 2017 2:21 pm

ProtoMAX will cut up to 1" thick material

User avatar
Carl O
OMAX Employee
Posts: 24
Joined: Thu Sep 14, 2017 10:43 am
Location: OMAX Corporation
Contact:

Wed Sep 12, 2018 1:06 pm

For some great examples of thick cutting (About 1" thick / 25mm), this posting in the forums, where the "Stallion" sample part is cut in various hard and soft materials.

User avatar
Dave F
OMAX Employee
Posts: 17
Joined: Mon Sep 11, 2017 2:13 pm

Fri Sep 14, 2018 9:29 am

Hello, thanks for asking! ProtoMAX will cut up to 1" thick material. What type material? Anything you can usually conceive of. It's more a question of what abrasive waterjets cannot cut. The water stream does not care what the material is and our Intelli-MAX cutting models will automatically compensate for material type and thickness to create the edge quality you desire.

Post Reply