Christmas Ornaments
-
Christine L
- OMAX Employee
- Posts: 10
- Joined: Thu Sep 14, 2017 9:57 am
Christmas is near and thought I would add a little fun to testing on our in-house Proto-MAX machine. These ornaments were cut with Aluminum 6061 in 0.07". Due to thickness (more like thinness) of material and material type (softer than steel), cut time was pretty reasonable. Each ornament was cut with 3 pierces and they are approx. 3.5" H x 3" W each.
- Attachments
-
-
-
-
-
-
Christine L
- OMAX Employee
- Posts: 10
- Joined: Thu Sep 14, 2017 9:57 am
This is finished product. Sand blasted then painted in gold spray paint.
- Attachments
-
- Finished product