ProtoCLOCK 11 in. clock Part 5

Made something amazing? Show everyone here.
Post Reply
sailboat
Posts: 6
Joined: Wed Jun 19, 2019 2:45 pm

Fri Jun 28, 2019 6:57 am

Clock_Spacer.omx
11 inch diameter HDPE plastic with 10 inch circle cut out. Notch a space for the light cord to go through.
image024.jpg
image024.jpg (15.77 KiB) Viewed 550 times
image025.jpg
image028.jpg
image028.jpg (14.66 KiB) Viewed 550 times

Mirror_Rim.omx and clock_mirror.omx

The mirror rim is 1/8 inch aluminum, 11 inches in diameter with a 10 inch circle cut out of the middle.
The clock mirror is 10 inches in diameter and 1/8 inch thick, purchased round at Michael’s craft store. A hole is cut in the middle for the clock motor to change the battery and adjust the time.
image030.jpg
image030.jpg (9.29 KiB) Viewed 550 times
Clock_MirrorBack.omx
image032.jpg
image032.jpg (8.3 KiB) Viewed 550 times
Post Reply